**************************************************************************************
*                                                                                     
*  Upgrade Guide for PCAN-Router Pro FD
*  © 2024 PEAK-System Technik GmbH Darmstadt, Germany
*                                                                                     
**************************************************************************************


1 Bootloader:
**************************************************************************************
At first, check the installed bootloader version. For this, open the software 
PEAK-Flash from the upgrade package and detect your device in step "Select Hardware". 
For more instructions about detecting the hardware with PEAK-Flash, see the 
PCAN-Router Pro FD documentation.
On the left of the hardware name a triangle can be clicked to list detailed 
information. Perform the following steps if your bootloader version is lower than the 
supplied file from directory "Upgrades/1_Bootloader" but not lower than v2.0.11.

> Use PEAK-Flash to transfer the bootloader upgrade to the module. This will overwrite
  the existing firmware! The bootloader cannot update itself on-the-fly.
> Do not reset the module with PEAK-Flash after transfer! 
> Power-off the PCAN-Router Pro FD and wait a moment.
> Set the module ID to a value from 0 to 14, if you have set it to 15 before.
> Power-on the PCAN-Router Pro FD.
		
  The firmware upload process starts and ALL LEDs will be red. After ten seconds of 
  stable power the upgrade process starts and the old bootloader is replaced with the 
  new one. After three seconds of green LEDs, the new bootloader is invoked and the 
  LEDs are blinking again to show running of the new bootloader.
		
> Start a new PEAK-Flash process and detect the module. When you click the triangle 
  left to the module name you should see the bootloader indicated with the new version 
  number. After that, you can upload the data logger or your custom firmware.

Note: If your bootloader has a version lower than 2.0.11, please contact our support 
for an appropriate upgrade package.